Bill,
yes, sorry that is a typo: I meant http://192.168.1.118:5762/setup.pl
Regards, Xboxboy
---------- Forwarded message --------- From: bill Ott billott@theotts.org Date: Thu, Mar 21, 2019 at 1:21 AM Subject: Re: [ledgersmb-users] Fwd: Production Install, Networking and Setup To: Xboxboy Mageia xboxboy.mageia@gmail.com
http://192.168.1.*188*:5762/setup.pl???? Did you mean http://192.168.1. *118:*5762/setup.pl?
Regards, Bill Ott
Home: 919-363-0031 Cell: 919-434-7589 Email: Mailto:billott@theotts.org billott@theotts.org Website: http://www.theotts.org Profile: http://www.linkedin.com/in/wbott
On 3/19/19 9:47 PM, Xboxboy Mageia wrote:
Sorry Bill: I meant to send it to the list :-0
Please see the network info I've added, in response to both Bill and Erik.
On Mon, Mar 18, 2019 at 6:45 PM Xboxboy Mageia xboxboy.mageia@gmail.com wrote:
Hello, I was sick over Xmas, and since then business has been booming, only now can I have a second look. Thank you all for you help.
On Thu, Jan 10, 2019 at 10:38 AM bill Ott billott@theotts.org wrote:
Running "brctl show" w/o/ the quotes on the VM's host will show you the bridge and the interfaces that are connected to it. 'ifconfig" w/o the quotes on the VM's host will show you the all of interfaces.
brctl show bridge name bridge id STP enabled interfaces virbr0 8000:525400da324e yes virbr0-nic
ifconfig
enp5s0 is on 192.168.1.109 lo is on 127.0.0.1 virbr0 is on 192.168.122.1
(sorry can't ssh in at the moment, let me know if you need all the details)
Might help chasing down the problem.
Regards, Bill Ott
Home: 919-363-0031 Cell: 919-434-7589 Email: Mailto:billott@theotts.org billott@theotts.org Website: http://www.theotts.org Profile: http://www.linkedin.com/in/wbott
On 1/9/19 5:21 PM, Erik Huelsmann wrote:
Hi,
Ok, so the debian install went simply. I used debian 9 (Stretch), without
a GUI. 'ip addr' gives 192.168.1.101, which sounds right, as that's my lan, 192.168.1.X.
I then followed the instructions on https://apt.ledgersmb.org/index.html, but I installed version 1.5, and did not add the 'test component', I don't know what that means, sorry.
[snip]
I was able to add the DB admin user where the prompt comes up: Now do I need to reset/config mysql's root user and password also?
So from my desktop I tried to access via firefox 192.168.1.101:5762/setup.pl, but it's unable to connect.
Ok. Are you able to ping that ip address from your desktop? That should indicate if you should expect to be able to connect to the web server as well.
Yes, I can ping the debian VM with "ping 192.168.1.118"
I can access the default debian apache web server at 192.168.1.118, but no luck with 192.168.1.188:5762/setup.pl
I have a functioning fedora os VM on 192.168.1.107 with nextcloud working fine.
I have the VM network set to bridged, networking is my downfall, and the
other thing I suspect is that I need to open the firewall for the webserver.
Bridged sounds fine. quick question: Is the "eth0" (or enpXs0 with X a number) network on the VM's host part of the bridge? If not, you probably need to enable IP forwarding. Before we go that route, lets start by checking you can 'ping' the address though. (And: can you ping the host that the VM is running on?)
I can ping the host with "ping 192.168.1.109"
All advice appreciated.
Regards,
-- Bye,
Erik.
http://efficito.com -- Hosted accounting and ERP. Robust and Flexible. No vendor lock-in.
users mailing listusers@lists.ledgersmb.orghttps://lists.ledgersmb.org/mailman/listinfo/users
users mailing list users@lists.ledgersmb.org https://lists.ledgersmb.org/mailman/listinfo/users
_______________________________________________ users mailing listusers@lists.ledgersmb.orghttps://lists.ledgersmb.org/mailman/listinfo/users