Bill,

yes, sorry that is a typo: I meant http://192.168.1.118:5762/setup.pl

Regards,

Xboxboy

---------- Forwarded message ---------
From: bill Ott <billott@theotts.org>
Date: Thu, Mar 21, 2019 at 1:21 AM
Subject: Re: [ledgersmb-users] Fwd: Production Install, Networking and Setup
To: Xboxboy Mageia <xboxboy.mageia@gmail.com>

Regards,
Bill Ott

Home: 919-363-0031
Cell: 919-434-7589
Email: Mailto:billott@theotts.org
Website: http://www.theotts.org
Profile: http://www.linkedin.com/in/wbott

On 3/19/19 9:47 PM, Xboxboy Mageia wrote:

Sorry Bill: I meant to send it to the list :-0

Please see the network info I've added, in response to both Bill and Erik.
On Mon, Mar 18, 2019 at 6:45 PM Xboxboy Mageia <xboxboy.mageia@gmail.com> wrote:
Hello,

I was sick over Xmas, and since then business has been booming, only now can I have a second look. Thank you all for you help.
On Thu, Jan 10, 2019 at 10:38 AM bill Ott <billott@theotts.org> wrote:

Running "brctl show" w/o/ the quotes on the VM's host will show you the bridge and the interfaces that are connected to it. 'ifconfig" w/o the quotes on the VM's host will show you the all of interfaces.

brctl show

bridge name         bridge id                      STP enabled    interfaces

virbr0                  8000:525400da324e      yes                  virbr0-nic

ifconfig

enp5s0   is on 192.168.1.109

lo    is on 127.0.0.1

virbr0    is on 192.168.122.1

(sorry can't ssh in at the moment, let me know if you need all the details)
Might help chasing down the problem.
Regards,
Bill Ott

Home: 919-363-0031
Cell: 919-434-7589
Email: Mailto:billott@theotts.org
Website: http://www.theotts.org
Profile: http://www.linkedin.com/in/wbott
On 1/9/19 5:21 PM, Erik Huelsmann wrote:

Hi,

Ok, so the debian install went simply. I used debian 9 (Stretch), without a GUI. 'ip addr' gives 192.168.1.101, which sounds right, as that's my lan, 192.168.1.X.

I then followed the instructions on https://apt.ledgersmb.org/index.html, but I installed version 1.5, and did not add the 'test component', I don't know what that means, sorry.

[snip]

I was able to add the DB admin user where the prompt comes up: Now do I need to reset/config mysql's root user and password also?

So from my desktop I tried to access via firefox 192.168.1.101:5762/setup.pl, but it's unable to connect.

Ok. Are you able to ping that ip address from your desktop? That should indicate if you should expect to be able to connect to the web server as well.
Yes, I can ping the debian VM with "ping 192.168.1.118"

I can access the default debian apache web server at 192.168.1.118, but no luck with 192.168.1.188:5762/setup.pl

I have a functioning fedora os VM on 192.168.1.107 with nextcloud working fine.

I have the VM network set to bridged, networking is my downfall, and the other thing I suspect is that I need to open the firewall for the webserver.

Bridged sounds fine. quick question: Is the "eth0" (or enpXs0 with X a number) network on the VM's host part of the bridge? If not, you probably need to enable IP forwarding. Before we go that route, lets start by checking you can 'ping' the address though. (And: can you ping the host that the VM is running on?)

I can ping the host with "ping 192.168.1.109"
All advice appreciated.

Regards,

--

Bye,

Erik.

http://efficito.com -- Hosted accounting and ERP.

Robust and Flexible. No vendor lock-in.
_______________________________________________
users mailing list
users@lists.ledgersmb.org
https://lists.ledgersmb.org/mailman/listinfo/users
_______________________________________________
users mailing list
users@lists.ledgersmb.org
https://lists.ledgersmb.org/mailman/listinfo/users
_______________________________________________
users mailing list
users@lists.ledgersmb.org
https://lists.ledgersmb.org/mailman/listinfo/users