- users - lists.freelock.com

LedgerSMB community update
by Erik Huelsmann 01 Jul '19

01 Jul '19

Hi, It was just before New Year when I sent out the last community update, so it's time for a follow up. This half year, we only released 1 maintenance release for 1.6.10. With no specific new bug reports coming in, the development team was able to focus its efforts on 1.7.0. On that front, a lot of development effort has gone into getting the Multi-Currency branch ready to be merged to master. On January 20th the long-awaited multi-currency branch merge happened, followed by the release of 1.7.0-alpha1. Since then, we've been developing more tests simulating user interaction with LedgerSMB to ensure that 1.7.0 will be as good as 1.6.0 when it is released. In the process, we have been fixing a few regressions. With the additional tests - which include tests for AR & AP invoices and transactions - we have increased test coverage from 29% (current on 1.6) to 40% (on master) and we're working to increase the number to well above 50% before release. The speed at which we're able to implement new tests is severely impacted by the fact that we hit a continuous integration limit: Travis CI allows us to run tests for a maximum of 50 minutes. Our test suite runs between 40 and 45 minutes in code-coverage testing mode. A lot of effort has gone into working on this problem. We're working to off-load the code-coverage test jobs to another Continuous Integration service (CircleCI) which *does* allow jobs to run longer than 50 minutes. Another direction of research was to reduce execution time of our test jobs. And while that did turn up some bugs in our Selenium test driver, it mainly helped the area where we didn't experience any problems (the non-code-coverage tests were reduced from 29-30 minutes of execution to 20-21 minutes of execution). Migrating some of our test infrastructure to CircleCI turned out to have the additional benefit of being able to start running our tests against Chrome and Firefox. Currently we only run against PhantomJS. While PhantomJS implements enough of JavaScript to support our testing, it's unmaintained and getting behind on recent standards. Being able to test with Chrome and Firefox will help to take advantage of more modern browser development techniques. As part of our optimization work, we helped create new releases of Weasel, Pherkin::Extension::Weasel and Test::BDD::Cucumber, where significant new features were added to Pherkin::Extension::Weasel to support increased developer efficiency. Looking to the immediate future, we're expecting to release 1.7.0-beta1 this week: we think 1.7.0 is feature complete and we'll work simply to stabilize it from here on. This means that 1.7.0 isn't production ready, but we're looking for people to test-drive it and value any and all bug reports we can get! Regards, Erik. -- Bye, Erik. http://efficito.com -- Hosted accounting and ERP. Robust and Flexible. No vendor lock-in.

1 0

Re: [ledgersmb-users] Fwd: Fwd: Production Install, Networking and Setup
by Robert J. Clay 18 May '19

18 May '19

On Sat, May 4, 2019 at 1:52 AM Xboxboy Mageia <xboxboy.mageia(a)gmail.com> wrote: >> > the browser wont go to http://LedgerSMB/setup.pl Did you tell the system on which the browser is running, which IP that 'LedgerSMB' name has? Or put it your local DNS? Also; if you're using the default setup, you should be using "https", not "http". And note (in case you don't already know) that browsers like Chromium really don't like using https with ssl certs like what we're using by default (a valid ssl cert but not one that is registered where the browser knows of), but how you get around that and still get the secure session depends on the browser. (But yes, despite such dns & ssl issues, we still recommend using secure broswer session to access the LSMB app.) > I tried adding the machines IP as the servername, but that didn't work either. In what way did you try adding it? In the URL? For instance, although I also have LXCs/VMs running on a local server, I usually have test containers running on my laptop. And don't have the networking where those are running accessible outside of the laptop. So rather than adding the server name for the LXC to the DNS on the laptop (since the IP can change depending on what other containers have been started), I just use the IP. For example; if 10.0.0.231 is the IP, then for the LSMB setup login page I would use https://10.0.0.231/setup.pl. Or, https://10.0.0.231/login.pl for the login page. -- Robert J. Clay rjclay(a)gmail.com

2 5

LEDGERSMB on Windows 10
by Terry Mcgrane 12 May '19

12 May '19

Hi all I sure as hell hope someone can help me. I have been looking at LedgerSMB now for 2 weeks trying to figure out how I get this working on a Windows10 PC, and damned if i understand any of it. I so would love to use this software, sick of paying out thousands of dollars each year for not much. Ledger SMB from what I have read and seem on the youtube is perfect it does everything i want and more. Is there anyone out there that would be willing to give me a hand setting it up on my PC using TEAMVIEWER. I live in Australia so you would have to consider the time difference. I am hoping to do this ASAP so if there is any I would really appreciate your help. Thank you Terry

2 1

Creating Docker Instance of LSMB
by Ryle Zabate 06 May '19

06 May '19

Greetings!Hello Team, upon configuring the docker command: docker-compose up, i did encounter the following error below: Starting ledgersmb2019_postgres_1 ... errorERROR: for ledgersmb2019_postgres_1 Cannot start service postgres: network f3a4c456e824f5462dfdedcbb29d41668863f1540aded7bc5c3bd93c2cbec085 not foundERROR: for postgres Cannot start service postgres: network f3a4c456e824f5462dfdedcbb29d41668863f1540aded7bc5c3bd93c2cbec085 not foundERROR: Encountered errors while bringing up the project.PS C:\Windows\System32\ledgersmb2019> For your kind assistance on how could i successfully run an instance of LSMB thru Docker image. Warm Regards,/ITD/ Ryle.Msinc/ITDept

1 1

Re: [ledgersmb-users] Fwd: Fwd: Production Install, Networking and Setup
by Xboxboy Mageia 04 May '19

04 May '19

Apologies Robert, gmail frustratingly doesn't auto-reply to group :( On Sat, May 4, 2019 at 3:22 PM Xboxboy Mageia <xboxboy.mageia(a)gmail.com> wrote: > > > On Mon, Apr 22, 2019 at 7:57 AM Robert J. Clay <rjclay(a)gmail.com> wrote: > >> >> >> The example LSMB distribution file 'apache-vhost.conf' is installed >> by the pkg as 'ledgersmb-1.5-proxy.conf' to the >> /etc/apache2/sites-available/ directory. >> >> Much of that file is already configured by default by the pkg, but >> the 'ServerName' item is not configured by default (which is why the >> pkg install does not curently attempt to enable the config file by >> default). Once that is set, on Debian you can enable it by using >> something like: >> >> Using the command "hostname" I get "LedgerSMB" > I've added that to the ledgersmb-1.5-proxy.conf file > > >> a2ensite ledgersmb-1.5-proxy.conf >> >> No complaints > > >> If that doesn't come up with any issues, then: >> >> systemctl reload apache2 >> >> If no issues come up, you can try accessing the LSMB setup page by >> going to https://server.name.com/setup.pl (or you could try via the >> IP...) >> >> the browser wont go to http://LedgerSMB/setup.pl > > So, I'm tripped up again: Sorry. > > I tried adding the machines IP as the servername, but that didn't work > either. > > Any questions/comments/concerns etc, please let us know. >> >> >> Thanks for your patience... I will get there though. > >> >> -- >> Robert J. Clay >> rjclay(a)gmail.com >> >

1 0

Fwd: Fwd: Production Install, Networking and Setup
by Xboxboy Mageia 21 Apr '19

21 Apr '19

Bill, yes, sorry that is a typo: I meant http://192.168.1.118:5762/setup.pl Regards, Xboxboy ---------- Forwarded message --------- From: bill Ott <billott(a)theotts.org> Date: Thu, Mar 21, 2019 at 1:21 AM Subject: Re: [ledgersmb-users] Fwd: Production Install, Networking and Setup To: Xboxboy Mageia <xboxboy.mageia(a)gmail.com> http://192.168.1.*188*:5762/setup.pl???? Did you mean http://192.168.1. *118:*5762/setup.pl? Regards, Bill Ott Home: 919-363-0031 Cell: 919-434-7589 Email: Mailto:billott@theotts.org <billott(a)theotts.org> Website: http://www.theotts.org Profile: http://www.linkedin.com/in/wbott On 3/19/19 9:47 PM, Xboxboy Mageia wrote: Sorry Bill: I meant to send it to the list :-0 Please see the network info I've added, in response to both Bill and Erik. On Mon, Mar 18, 2019 at 6:45 PM Xboxboy Mageia <xboxboy.mageia(a)gmail.com> wrote: > Hello, > I was sick over Xmas, and since then business has been booming, only now > can I have a second look. Thank you all for you help. > > > On Thu, Jan 10, 2019 at 10:38 AM bill Ott <billott(a)theotts.org> wrote: > >> Running "brctl show" w/o/ the quotes on the VM's host will show you the >> bridge and the interfaces that are connected to it. 'ifconfig" w/o the >> quotes on the VM's host will show you the all of interfaces. >> > brctl show > bridge name bridge id STP enabled > interfaces > virbr0 8000:525400da324e yes > virbr0-nic > > ifconfig > > enp5s0 is on 192.168.1.109 > lo is on 127.0.0.1 > virbr0 is on 192.168.122.1 > > (sorry can't ssh in at the moment, let me know if you need all the details) > > Might help chasing down the problem. >> >> Regards, >> Bill Ott >> >> Home: 919-363-0031 >> Cell: 919-434-7589 >> Email: Mailto:billott@theotts.org <billott(a)theotts.org> >> Website: http://www.theotts.org >> Profile: http://www.linkedin.com/in/wbott >> >> On 1/9/19 5:21 PM, Erik Huelsmann wrote: >> >> Hi, >> >> Ok, so the debian install went simply. I used debian 9 (Stretch), without >>>> a GUI. 'ip addr' gives 192.168.1.101, which sounds right, as that's my lan, >>>> 192.168.1.X. >>>> >>> >>> I then followed the instructions on https://apt.ledgersmb.org/index.html, >>> but I installed version 1.5, and did not add the 'test component', I don't >>> know what that means, sorry. >>> >> >> [snip] >> >> >>> I was able to add the DB admin user where the prompt comes up: Now do I >>> need to reset/config mysql's root user and password also? >>> >>> So from my desktop I tried to access via firefox >>> 192.168.1.101:5762/setup.pl, but it's unable to connect. >>> >> >> Ok. Are you able to ping that ip address from your desktop? That should >> indicate if you should expect to be able to connect to the web server as >> well. >> >> >> Yes, I can ping the debian VM with "ping 192.168.1.118" > I can access the default debian apache web server at 192.168.1.118, but no > luck with 192.168.1.188:5762/setup.pl > > I have a functioning fedora os VM on 192.168.1.107 with nextcloud working > fine. > > >> I have the VM network set to bridged, networking is my downfall, and the >>> other thing I suspect is that I need to open the firewall for the webserver. >>> >> >> Bridged sounds fine. quick question: Is the "eth0" (or enpXs0 with X a >> number) network on the VM's host part of the bridge? If not, you probably >> need to enable IP forwarding. Before we go that route, lets start by >> checking you can 'ping' the address though. (And: can you ping the host >> that the VM is running on?) >> >> I can ping the host with "ping 192.168.1.109" > >> >> >>> >>> All advice appreciated. >>> >> >> Regards, >> >> -- >> Bye, >> >> Erik. >> >> http://efficito.com -- Hosted accounting and ERP. >> Robust and Flexible. No vendor lock-in. >> >> _______________________________________________ >> users mailing listusers@lists.ledgersmb.orghttps://lists.ledgersmb.org/mailman/listinfo/users >> >> _______________________________________________ >> users mailing list >> users(a)lists.ledgersmb.org >> https://lists.ledgersmb.org/mailman/listinfo/users >> > _______________________________________________ users mailing listusers@lists.ledgersmb.orghttps://lists.ledgersmb.org/mailman/listinfo/users

4 9

Are there any subscribers using LedgerSMB versions older than 1.4?
by Erik Huelsmann 06 Apr '19

06 Apr '19

Hi all, Migrations have become considerably more controlled since the 1.5 release, which introduces a smooth migration from 1.4. As such migration paths do not exist for 1.1, 1.2 and 1.3, I'm eager to learn if there are any users out there of these old versions, and, if you're not migratiing, what's keeping you from doing so. If you can't publicly respond to this inquiry, please mail me privately so I can treat your information confidentially. Thanks for your responses, -- Bye, Erik. http://efficito.com -- Hosted accounting and ERP. Robust and Flexible. No vendor lock-in.

3 5

Re: [ledgersmb-users] Exchange rate
by Ryle Zabate 04 Apr '19

04 Apr '19

Hi, I have forgot to thank you and the instructions that you have provided are proven working.Thank you again Erik. Regards. Ryle.Msinc/ITDept From: "users-request(a)lists.ledgersmb.org" <users-request(a)lists.ledgersmb.org> To: users(a)lists.ledgersmb.org Sent: Sunday, January 13, 2019 4:00 AM Subject: users Digest, Vol 20, Issue 6 Send users mailing list submissions to users(a)lists.ledgersmb.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.ledgersmb.org/mailman/listinfo/users or, via email, send a message with subject or body 'help' to users-request(a)lists.ledgersmb.org You can reach the person managing the list at users-owner(a)lists.ledgersmb.org When replying, please edit your Subject line so it is more specific than "Re: Contents of users digest..." Today's Topics: 1. Fwd: Debian packages for LedgerSMB (Robert J. Clay) 2. Re: Are there any subscribers using LedgerSMB versions older than 1.4? (Erik Huelsmann) 3. Exchange rate (Erik Huelsmann) 4. Re: Are there any subscribers using LedgerSMB versions older than 1.4? (Erik Huelsmann) ---------------------------------------------------------------------- Message: 1 Date: Fri, 11 Jan 2019 18:07:59 -0500 From: "Robert J. Clay" <rjclay(a)gmail.com> To: users(a)lists.ledgersmb.org Subject: [ledgersmb-users] Fwd: Debian packages for LedgerSMB Message-ID: <CAL4BjXk44bu5QQrzwLXaJ5YeCQ2KnkebYSOFWiddXOC5AC-Hcw(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" Forgot to cc this to the mailing list... ---------- Forwarded message --------- From: Robert J. Clay <rjclay(a)gmail.com> Date: Tue, Jan 1, 2019 at 2:16 PM Subject: Re: [ledgersmb-users] Debian packages for LedgerSMB To: Nicolas Couchoud <nicolas.couchoud__ledgersmb(a)normalesup.org> Hi Nicolas! On Mon, Dec 31, 2018 at 10:07 AM Nicolas Couchoud <nicolas.couchoud__ledgersmb(a)normalesup.org> wrote: > > Hi, > > As far as I have understood, there are two sorts of Debian packages for > LedgerSMB : > * Debian regular repositories just contain packages called « ledgersmb » ; Yes, that's the official Debian package for the LedgerSMB application (which also migrates over to the developmental version of Ubuntu). The most recent is the one for the most recently released version of LedgerSMB, 1.6.9. (Released just a few days ago.) > * your repository apt.ledgersmb.org contains packages with names like > « ledgersmb-1.5 » and « ledgersmb-1.5-apache ». Yes, the ledgersmb-1.5 packages are for the 1.5.x versions of LedgerSMB, with the latest being v1.5.24 (just released a few days ago). The ones like ledgersmb-1.5-apache are for web proxies if one wants to use one. The 1.5.x versions will be supported by the project until December of this year (2019) when it will see its End Of Life for community support.. There are also the ledgersmb-1.6 packages, which are for the 1.6.x versions of the LedgerSMB application (the current stable). It also has the associated packages for a web proxy selection. > So, I feel a bit lost... Is there one preferred sort of package ? Are > some of these obsolete ? The ledgersmb-1.5 packages aren't "obsolete" but they are for the old-stable version of LedgerSMB (1.5.x), which as noted will see End of Life in December 2019. (Whereas the 1.6.x versions are good for LedgerSMB Community Support until December of 2021.) Their advantage is that due to the availability of dependencies, the ledgersmb-1.5 packages can be backported to older versions of Debian (or Ubuntu) than the ledgersmb-1.6 packages currently can be. The primary difference between the 'ledgersmb' package and the 'ledgersmb-1.x' packages is that due to Debian Policy (regarding embedded libraries), the ledgersmb packages uses the system installed packages for the Dojo libraries while the ledgersmb-1.x packages use the embedded versions of the Dojo libraries that are released with each version of the LedgerSMB application. -- Robert James Clay rjclay(a)gmail.com, jame(a)rocasa.us -- Robert J. Clay rjclay(a)gmail.com ------------------------------ Message: 2 Date: Sat, 12 Jan 2019 00:30:59 +0100 From: Erik Huelsmann <ehuels(a)gmail.com> To: Peeter Pärtel <peeter(a)sigma.ee> Cc: users(a)lists.ledgersmb.org Subject: Re: [ledgersmb-users] Are there any subscribers using LedgerSMB versions older than 1.4? Message-ID: <CACOoB6jENKkx8-FOc7tJY2PhcthqOyiLuFG8Vfs0rrCHmosrvQ(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Hi Peeter, On Fri, Jan 11, 2019 at 4:05 PM Peeter Pärtel <peeter(a)sigma.ee> wrote: still on 1.2.26 as it is the last version where I can freely change all > existing invoices. As mistakes happen or clients want some other > description etc changes on them, this is really important to us. > Yes, you brought up that point before, I remember. Actually, you were not the only one to bring it up -- I've got a few other contacts that would really like this functionality to be re-introduced again. Some time back, I went over the possibilities to do so with Chris and we found a way to extend LedgerSMB 1.3+ to support both your use-case and still maintain Chris's position about not deleting data (maintaining a full audit trail). Unfortunately, the pipeline for 1.7 is very full at the moment and I'm not likely to be able to address this idea and build it into 1.7 (as that release is planned for this summer). But as latest version of Debian where 1.2.26 works is Debian 8 and it's end > of life is June 30th 2020 we are planning to move away from LedgerSMB to > some other software. Already migrating some companies starting 2019 and > rest is planned starting from 2020. > It's not that I'd like to encourage you to keep working on 1.2, but if you want to keep working on 1.2, I think that version can be made to work on Debian 9+ quite easily. > If there has been any changes in allowing to change existing invoices > (both parts and services), then it would be good to know before we have > left completely. > Yes, there has been a change in allowing existing invoices to be changed in the sense that the project now has a way to maintain full audit trail, working COGS *and* allow the changed invoices. Which means we're no longer against allowing it. The actual code to allow it though is yet to be written. Thanks for taking the time to respond! Regards, Erik.

1 0

Apache2 error logs
by Ryle Zabate 04 Apr '19

04 Apr '19

Greetings. Hello team.Can i have your assistance for the ffg: error below that is reflected based on the above subject? "AH01630: client denied by server configuration: /var/lib/ledgersmb/css/ledgersmb.css, referer: http://127.0.0.1/ledgersmb/am.pl?login=adm&action=display_stylesheet&module…" Your response is highly appreciated. Warm Regards, Ryle.Msinc/ITDept

1 0

Re: [ledgersmb-users] Fwd: Fwd: Production Install, Networking and Setup
by Gnucash Xboxboy Mageia 30 Mar '19

30 Mar '19

On Wed, Mar 27, 2019 at 7:26 AM bill Ott <billott(a)theotts.org> wrote: > Xboxboy, I am trying to understand your host network setup. As an example, > here is my firewall network configuration supporting two VM's. It's not > everything, but is what is required to run the VMs. > > > My brctl on the firewall: > > [root@wbofw perl]# brctl show *ID matches mac addr for eth1 and eno1* > bridge name bridge id STP enabled interfaces > eth1 8000.*001e67e0bbd6 * no eno1 > > vnet0 > > vnet1 > > And the ifconfig from the two VMs running on the firewall system. > Thanks for reply: Here's my host results: brctl show bridge name bridge id STP enabled interfaces virbr0 8000.525400da324e yes virbr0-nic and here is the guest debian OS enpos3: flags=4163<UP,BROADCAST,RUNNING,MULTITCAST> mtu 1500 inet 192.168.1.118 netmask 255.255.255.0 broadcast 192.168.1.255 inet6 fe80::a00:27ff:fe87:a4b prefixlen 64 scopeid 0x20<link> ether 08:00:27:87:0a:4b txqueuelen 1000 (Ethernet) RX packets 1735 bytes 1215954 (1.1Mib) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 594 bytes 44649 (43.6 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0X10<host> loop txqueuelen 1 (Local Loopback) RX packets 262 bytes 60033 (58.5KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 262 bytes 60033 (58.5 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > [root@yawssys]# ifconfig *(sshing into the vnet0 VM) note Mac address is > identical to vnet0* > eth1: Link encap:Ethernet HWaddr *FE:54:00:B7:EA:E1* > inet addr:96.10.34.44 Bcast:96.10.34.63 Mask:255.255.255.224 > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:108356 errors:0 dropped:0 overruns:0 frame:0 > TX packets:168471 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:8480160 (8.0 MiB) TX bytes:199696532 (190.4 MiB) > [root@yawssys7]# ifconfig *(sshing into the vnet1 VM) note Mac address is > identical vnet1* > eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 > inet 96.10.34.50 netmask 255.255.255.224 broadcast 96.10.34.63 > inet6 fe80::5054:ff:fee2:af0b prefixlen 64 scopeid 0x20<link> > ether *FE:54:00:e2:af:0b* txqueuelen 1000 (Ethernet) > RX packets 438230 bytes 223232328 (212.8 MiB) > RX errors 0 dropped 14003 overruns 0 frame 0 > TX packets 276326 bytes 137199104 (130.8 MiB) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > The nomenclature is slightly different on the systems since they are > running different versions of Centos. > > I am running KVM virtual machines. They may work differently than your > VM's. > > I wanted to see your VM ifconfig to see it they align with your host > interfaces. > > Hope this helps. > > > > Regards, > Bill Ott > > Home: 919-363-0031 > Cell: 919-434-7589 > Email: Mailto:billott@theotts.org <billott(a)theotts.org> > Website: http://www.theotts.org > Profile: http://www.linkedin.com/in/wbott > > On 3/24/19 7:44 PM, Gnucash Xboxboy Mageia wrote: > > > > On Mon, Mar 25, 2019 at 1:50 AM bill Ott <billott(a)theotts.org> wrote: > >> Can you send me the results of the ifconfig on the VM's host? >> >> Reviewing I noticed. from below >> "virbr0 is on 192.168.122.1" which is the wrong octal. it should be >> 192.168.1.XXX. It may be there because your VM is setting up its own DHCP. >> But that begs the question of how you are reaching the 192.168.1.188 apache >> interface on the VM. >> >> If you ssh into the VM and issue an ifconfig there, what is its IP >> address? >> >> Thanks Bill: Ok, the Host IP has changed, because I didn't have a fixed > IP for it: I've now sorted that. So here are the results of 'ifconfig' > > enp5s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 > inet 192.168.1.106 netmask 255.255.255.0 broadcast 192.168.1.255 > inet6 fe80::62a4:4cff:fe38:82a9 prefixlen 64 scopeid 0x20<link> > ether 60:a4:4c:38:82:a9 txqueuelen 1000 (Ethernet) > RX packets 2173 bytes 521229 (509.0 KiB) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 176 bytes 19475 (19.0 KiB) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 > inet 127.0.0.1 netmask 255.0.0.0 > inet6 ::1 prefixlen 128 scopeid 0x10<host> > loop txqueuelen 1000 (Local Loopback) > RX packets 100 bytes 8648 (8.4 KiB) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 100 bytes 8648 (8.4 KiB) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > virbr0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 > inet 192.168.122.1 netmask 255.255.255.0 broadcast > 192.168.122.255 > ether 52:54:00:da:32:4e txqueuelen 1000 (Ethernet) > RX packets 0 bytes 0 (0.0 B) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 0 bytes 0 (0.0 B) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > > >> Regards, >> Bill Ott >> >> Home: 919-363-0031 >> Cell: 919-434-7589 >> Email: Mailto:billott@theotts.org <billott(a)theotts.org> >> Website: http://www.theotts.org >> Profile: http://www.linkedin.com/in/wbott >> >> On 3/24/19 1:28 AM, Gnucash Xboxboy Mageia wrote: >> >> >> >> On Thu, Mar 21, 2019 at 11:00 PM bill Ott <billott(a)theotts.org> wrote: >> >>> Have you tried temporarily turning off SELinux ("setenforce 0"), then >>> trying to connect? After doing the test, turn SELinux back on with >>> "setenforce 1". >>> >> Thanks >> Just tried that on the host OS with no change. >> The debian VM doesn't have SElinux installed, as 'getenforce' and >> 'sestatus' return command not found. >> >> Regards, >>> Bill Ott >>> >>> Home: 919-363-0031 >>> Cell: 919-434-7589 >>> Email: Mailto:billott@theotts.org <billott(a)theotts.org> >>> Website: http://www.theotts.org >>> Profile: http://www.linkedin.com/in/wbott >>> >>> On 3/21/19 3:40 AM, Xboxboy Mageia wrote: >>> >>> Bill, >>> >>> yes, sorry that is a typo: I meant http://192.168.1.118:5762/setup.pl >>> >>> Regards, >>> Xboxboy >>> >>> ---------- Forwarded message --------- >>> From: bill Ott <billott(a)theotts.org> >>> Date: Thu, Mar 21, 2019 at 1:21 AM >>> Subject: Re: [ledgersmb-users] Fwd: Production Install, Networking and >>> Setup >>> To: Xboxboy Mageia <xboxboy.mageia(a)gmail.com> >>> >>> http://192.168.1.*188*:5762/setup.pl???? Did you mean http://192.168.1. >>> *118:*5762/setup.pl? >>> >>> Regards, >>> Bill Ott >>> >>> Home: 919-363-0031 >>> Cell: 919-434-7589 >>> Email: Mailto:billott@theotts.org <billott(a)theotts.org> >>> Website: http://www.theotts.org >>> Profile: http://www.linkedin.com/in/wbott >>> >>> On 3/19/19 9:47 PM, Xboxboy Mageia wrote: >>> >>> Sorry Bill: I meant to send it to the list :-0 >>> >>> Please see the network info I've added, in response to both Bill and >>> Erik. >>> >>> On Mon, Mar 18, 2019 at 6:45 PM Xboxboy Mageia <xboxboy.mageia(a)gmail.com> >>> wrote: >>> >>>> Hello, >>>> I was sick over Xmas, and since then business has been booming, only >>>> now can I have a second look. Thank you all for you help. >>>> >>>> >>>> On Thu, Jan 10, 2019 at 10:38 AM bill Ott <billott(a)theotts.org> wrote: >>>> >>>>> Running "brctl show" w/o/ the quotes on the VM's host will show you >>>>> the bridge and the interfaces that are connected to it. 'ifconfig" w/o the >>>>> quotes on the VM's host will show you the all of interfaces. >>>>> >>>> brctl show >>>> bridge name bridge id STP enabled >>>> interfaces >>>> virbr0 8000:525400da324e yes >>>> virbr0-nic >>>> >>>> ifconfig >>>> >>>> enp5s0 is on 192.168.1.109 >>>> lo is on 127.0.0.1 >>>> virbr0 is on 192.168.122.1 >>>> >>>> (sorry can't ssh in at the moment, let me know if you need all the >>>> details) >>>> >>>> Might help chasing down the problem. >>>>> >>>>> Regards, >>>>> Bill Ott >>>>> >>>>> Home: 919-363-0031 >>>>> Cell: 919-434-7589 >>>>> Email: Mailto:billott@theotts.org <billott(a)theotts.org> >>>>> Website: http://www.theotts.org >>>>> Profile: http://www.linkedin.com/in/wbott >>>>> >>>>> On 1/9/19 5:21 PM, Erik Huelsmann wrote: >>>>> >>>>> Hi, >>>>> >>>>> Ok, so the debian install went simply. I used debian 9 (Stretch), >>>>>>> without a GUI. 'ip addr' gives 192.168.1.101, which sounds right, as that's >>>>>>> my lan, 192.168.1.X. >>>>>>> >>>>>> >>>>>> I then followed the instructions on >>>>>> https://apt.ledgersmb.org/index.html, but I installed version 1.5, >>>>>> and did not add the 'test component', I don't know what that means, sorry. >>>>>> >>>>> >>>>> [snip] >>>>> >>>>> >>>>>> I was able to add the DB admin user where the prompt comes up: Now do >>>>>> I need to reset/config mysql's root user and password also? >>>>>> >>>>>> So from my desktop I tried to access via firefox >>>>>> 192.168.1.101:5762/setup.pl, but it's unable to connect. >>>>>> >>>>> >>>>> Ok. Are you able to ping that ip address from your desktop? That >>>>> should indicate if you should expect to be able to connect to the web >>>>> server as well. >>>>> >>>>> >>>>> Yes, I can ping the debian VM with "ping 192.168.1.118" >>>> I can access the default debian apache web server at 192.168.1.118, but >>>> no luck with 192.168.1.188:5762/setup.pl >>>> >>>> I have a functioning fedora os VM on 192.168.1.107 with nextcloud >>>> working fine. >>>> >>>> >>>>> I have the VM network set to bridged, networking is my downfall, and >>>>>> the other thing I suspect is that I need to open the firewall for the >>>>>> webserver. >>>>>> >>>>> >>>>> Bridged sounds fine. quick question: Is the "eth0" (or enpXs0 with X a >>>>> number) network on the VM's host part of the bridge? If not, you probably >>>>> need to enable IP forwarding. Before we go that route, lets start by >>>>> checking you can 'ping' the address though. (And: can you ping the host >>>>> that the VM is running on?) >>>>> >>>>> I can ping the host with "ping 192.168.1.109" >>>> >>>>> >>>>> >>>>>> >>>>>> All advice appreciated. >>>>>> >>>>> >>>>> Regards, >>>>> >>>>> -- >>>>> Bye, >>>>> >>>>> Erik. >>>>> >>>>> http://efficito.com -- Hosted accounting and ERP. >>>>> Robust and Flexible. No vendor lock-in. >>>>> >>>>> _______________________________________________ >>>>> users mailing listusers@lists.ledgersmb.orghttps://lists.ledgersmb.org/mailman/listinfo/users >>>>> >>>>> _______________________________________________ >>>>> users mailing list >>>>> users(a)lists.ledgersmb.org >>>>> https://lists.ledgersmb.org/mailman/listinfo/users >>>>> >>>> >>> _______________________________________________ >>> users mailing listusers@lists.ledgersmb.orghttps://lists.ledgersmb.org/mailman/listinfo/users >>> >>> >>> _______________________________________________ >>> users mailing listusers@lists.ledgersmb.orghttps://lists.ledgersmb.org/mailman/listinfo/users >>> >>> _______________________________________________ >>> users mailing list >>> users(a)lists.ledgersmb.org >>> https://lists.ledgersmb.org/mailman/listinfo/users >>> >> >> _______________________________________________ >> users mailing listusers@lists.ledgersmb.orghttps://lists.ledgersmb.org/mailman/listinfo/users >> >> > _______________________________________________ > users mailing listusers@lists.ledgersmb.orghttps://lists.ledgersmb.org/mailman/listinfo/users > >

1 0