Fwd: https://github.com/ledgersmb/ledgersmb-dev-docker instructions about LedgerSMB Git repository
2 Aug
2018
2 Aug
'18
4:45 p.m.
Hoping someone on this list can answer the question in
the following message to the newsgroup.
-------- Forwarded Message --------
Subject: https://github.com/ledgersmb/ledgersmb-dev-docker instructions
about LedgerSMB Git repository
Date: Thu, 2 Aug 2018 10:54:58 -0500
From: Larry Evans <cppljevans(a)suddenlink.net>
Newsgroups: gwene.org.ledgersmb
The instructions:
https://github.com/ledgersmb/ledgersmb-dev-docker
say:
this project expects a LedgerSMB Git repository to exist in
the current directory.
So, does that mean when I do:
git clone https://github.com/ledgersmb/LedgerSMB.git
it should be within the directory produced when I do:
git clone https://github.com/ledgersmb/ledgersmb-dev-docker.git
?
TIA.
-regards,
Larry
3 Aug
3 Aug
8:58 a.m.
Hi Larry,
On Thu, Aug 2, 2018 at 6:45 PM, Larry Evans <cppljevans(a)suddenlink.net>
wrote:
Hoping someone on this list can answer the question
in
the following message to the newsgroup.
-------- Forwarded Message --------
Subject: https://github.com/ledgersmb/ledgersmb-dev-docker instructions
about LedgerSMB Git repository
Date: Thu, 2 Aug 2018 10:54:58 -0500
From: Larry Evans <cppljevans(a)suddenlink.net>
Newsgroups: gwene.org.ledgersmb
The instructions:
https://github.com/ledgersmb/ledgersmb-dev-docker
say:
this project expects a LedgerSMB Git repository to exist in
the current directory.
So, does that mean when I do:
git clone https://github.com/ledgersmb/LedgerSMB.git
it should be within the directory produced when I do:
git clone https://github.com/ledgersmb/ledgersmb-dev-docker.git
?
What I do is the following:
$ git clone https://github.com/ledgersmb/LedgerSMB.git
$ git clone https://github.com/ledgersmb/ledgersmb-dev-docker.git
$ cd LedgerSMB
$ ../ledgersmb-dev-docker/lsmb master up -d
That should give you a set of running containers based on the branch in the
LedgerSMB directory (which is "master" by default).
note that the "master" in "$ ../ledgersmb-dev-docker/lsmb master up
-d" is
just a common name for the containers; not a way to select a branch.
TIA.
-regards,
Larry
_______________________________________________
users mailing list
users(a)lists.ledgersmb.org
https://lists.ledgersmb.org/mailman/listinfo/users
HTH,
--
Bye,
Erik.
http://efficito.com -- Hosted accounting and ERP.
Robust and Flexible. No vendor lock-in.
2:04 p.m.
On 08/02/2018 11:45 AM, Larry Evans wrote:
Hoping someone on this list can answer the question
in
the following message to the newsgroup.
-------- Forwarded Message --------
Subject: https://github.com/ledgersmb/ledgersmb-dev-docker instructions
about LedgerSMB Git repository
Date: Thu, 2 Aug 2018 10:54:58 -0500
From: Larry Evans <cppljevans(a)suddenlink.net>
Newsgroups: gwene.org.ledgersmb
The instructions:
https://github.com/ledgersmb/ledgersmb-dev-docker
say:
this project expects a LedgerSMB Git repository to exist in
the current directory.
So, does that mean when I do:
git clone https://github.com/ledgersmb/LedgerSMB.git
it should be within the directory produced when I do:
git clone https://github.com/ledgersmb/ledgersmb-dev-docker.git
?
TIA.
-regards,
Larry
In private emails, Erik Huelsmann was kind enough to find a solution:
$ git clone https://github.com/ledgersmb/LedgerSMB.git
$ git clone https://github.com/ledgersmb/ledgersmb-dev-docker.git
$ cd LedgerSMB
$ ../ledgersmb-dev-docker/lsmb-dev master up -d
However, that failed because my lsmb-dev calls docker-compose and
the docker-compose I'd installed with synaptic wasn't compatible with
the ledgersmb-dev-docker/docker-compose.yml file which I'd just cloned.
So, downloaded the latest docker-compose as instructed here:
https://github.com/docker/compose/releases
and tried again. This time it seemed to work because there was a *lot*
of downloads and no error msgs and shown in the attached.
Hat's off to Eric!
-regards,
Larry
5:27 p.m.
On 08/03/2018 09:04 AM, Larry Evans wrote:
On 08/02/2018 11:45 AM, Larry Evans wrote:
Unfortunately, the odyssey doesn't end there.
As suggested by the output on attachement, put url:
http://172.18.0.5:5762
in my firefox browser. This produce a window with a nice
LedgerSMB graphic, but with the text (centered):
If this text is showing, there's most likely
a problem with
searching for this text in source, found it in:
LedgerSMB/UI/login.html
as follows:
<img
style="display: block; margin: auto auto; font-family: "
src="js-src/dijit/icons/images/loadingAnimation.gif"
alt="If this text is showing, there's most likely a
problem with the Dojo setup"
title="Loading ..."
width="20"
height="20" />
further exploration lead me to follow instructions in:
LedgerSMB/UI/js-src/README.md
IOW, I did some more git calls; however, that still didn't produce the
js directory; hence, I just modified the login.html to reference the
js-src instead of the js directory. When I refreshed firefox, the
error msg had disappeared, but there were not buttons or fields
on the page. Only the nice LedgerSMB graphic.
Is that expected?
-regards,
Larry
Hoping someone on this list can answer the
question in
the following message to the newsgroup.
-------- Forwarded Message --------
Subject: https://github.com/ledgersmb/ledgersmb-dev-docker
instructions about LedgerSMB Git repository
Date: Thu, 2 Aug 2018 10:54:58 -0500
From: Larry Evans <cppljevans(a)suddenlink.net>
Newsgroups: gwene.org.ledgersmb
The instructions:
https://github.com/ledgersmb/ledgersmb-dev-docker
say:
this project expects a LedgerSMB Git repository to exist in
the current directory.
So, does that mean when I do:
git clone https://github.com/ledgersmb/LedgerSMB.git
it should be within the directory produced when I do:
git clone https://github.com/ledgersmb/ledgersmb-dev-docker.git
?
TIA.
-regards,
Larry
In private emails, Erik Huelsmann was kind enough to find a solution:
$ git clone https://github.com/ledgersmb/LedgerSMB.git
$ git clone https://github.com/ledgersmb/ledgersmb-dev-docker.git
$ cd LedgerSMB
$ ../ledgersmb-dev-docker/lsmb-dev master up -d
However, that failed because my lsmb-dev calls docker-compose and
the docker-compose I'd installed with synaptic wasn't compatible with
the ledgersmb-dev-docker/docker-compose.yml file which I'd just cloned.
So, downloaded the latest docker-compose as instructed here:
https://github.com/docker/compose/releases
and tried again. This time it seemed to work because there was a *lot*
of downloads and no error msgs and shown in the attached.
Hat's off to Eric!
11 Aug
11 Aug
10:09 p.m.
Hi Larry,
Sorry for the late reaction. It's holiday season in the Netherlands and
I've been enjoying mine. Marked your mail for follow-up, but completely
forgot about it after that. Here's your answer finally.
On Fri, Aug 3, 2018 at 7:27 PM, Larry Evans <cppljevans(a)suddenlink.net>
wrote:
So, does that mean when I do:
Unfortunately, the odyssey doesn't end there.
As suggested by the output on attachement, put url:
http://172.18.0.5:5762
in my firefox browser. This produce a window with a nice
LedgerSMB graphic, but with the text (centered):
If this text is showing, there's most likely
a problem with
The text got wrapped. It should have read "... a problem with your
installed Dojo setup"
git clone https://github.com/ledgersmb/LedgerSMB.git
it should be within the directory produced when I do:
git clone https://github.com/ledgersmb/ledgersmb-dev-docker.git
?
TIA.
-regards,
Larry
In private emails, Erik Huelsmann was kind enough to find a solution:
$ git clone https://github.com/ledgersmb/LedgerSMB.git
$ git clone https://github.com/ledgersmb/ledgersmb-dev-docker.git
$ cd LedgerSMB
$ ../ledgersmb-dev-docker/lsmb-dev master up -d
However, that failed because my lsmb-dev calls docker-compose and
the docker-compose I'd installed with synaptic wasn't compatible with
the ledgersmb-dev-docker/docker-compose.yml file which I'd just cloned.
So, downloaded the latest docker-compose as instructed here:
https://github.com/docker/compose/releases
and tried again. This time it seemed to work because there was a *lot*
of downloads and no error msgs and shown in the attached.
Hat's off to Eric!
searching for this text in source, found it in:
LedgerSMB/UI/login.html
as follows:
<img
style="display: block; margin: auto auto; font-family: "
src="js-src/dijit/icons/images/loadingAnimation.gif"
alt="If this text is showing, there's most likely a
problem with the Dojo setup"
title="Loading ..."
width="20"
height="20" />
further exploration lead me to follow instructions in:
LedgerSMB/UI/js-src/README.md
IOW, I did some more git calls; however, that still didn't produce the
js directory; hence, I just modified the login.html to reference the
js-src instead of the js directory. When I refreshed firefox, the
error msg had disappeared, but there were not buttons or fields
on the page. Only the nice LedgerSMB graphic.
Is that expected?
I'm afraid that's to be expected indeed. There should have been
documentation, probably, which told you copy
examples/conf/ledgersmb.conf.default to the project's root directory and
change row "# dojo_built = 1" to "dojo_built = 0" (that is: remove
the
leading "# " and change the "1" to "0").
That way, the UI/js-src/ directory gets mapped to the /js/ directory in the
URL space.
Hope that helps!
Regards,
--
Bye,
Erik.
http://efficito.com -- Hosted accounting and ERP.
Robust and Flexible. No vendor lock-in.
1695
days inactive
1704
days old
4 comments
2 participants
participants (2)
-
Erik Huelsmann -
Larry Evans