Hi Harald, If you use the old version, as you wrote in the SUBJECT, I recommend to not use it. Instead, you should use the latest docker version, as that will work on any docker compatible system, debian, ubuntu, etc. Installing via a traditional way could needs more experiences until you got everything working. I also switched to docker and frankly, the developers did excellent job on this Please refer to this, sent by the developers on Sunday: For installation instructions and system requirements, see https://github.com/ledgersmb/LedgerSMB/blob/1.12.6/README.md The release can be downloaded from our download site at https://download.ledgersmb.org/f/Releases/1.12.6 The release can be downloaded from GitHub at https://github.com/ledgersmb/LedgerSMB/releases/tag/1.12.6 Or pulled from the GitHub Container Registry $ docker pull ghcr.io/ledgersmb/ledgersmb:1.12.6 Or pulled from Docker Hub using the command $ docker pull ledgersmb/ledgersmb:1.12.6 These are the sha256 checksums of the uploaded files: 1f876d9d97932458d668ff4f5307ebc2f87d7be27a830bbd793be33b5bccd847 ledgersmb-1.12.6.tar.gz 8a9f4fa107f2332c9192a9196b76819b966ba7cc7feda4d527f9b2e237819d23 ledgersmb-1.12.6.tar.gz.asc My docker compose file is the following for reference: -------------------- >8 ------------------------ # This docker-compose file creates one # compose 'project' consisting of two containers # # 1. The PostgreSQL data container # 2. The LedgerSMB application container # # LedgerSMB persists all its data in the database, # so no special care needs to be taken on # container upgrades. With PostgreSQL, data is # persisted across upgrades by the use of a # special 'dbdata' volume version: "3.2" services: # Note that the container needs to be named "postgres" here, # because that allows us to use the default hostname ("postgres") # from the LedgerSMB configuration postgres: image: postgres:15-alpine environment: # Replace the password below for a secure setup POSTGRES_PASSWORD: CHANGEME PGDATA: /var/lib/postgresql/data/pgdata networks: - internal ports: - "5763:5432" volumes: - "pgdata:/var/lib/postgresql/data" # Comment the line below to stop the container from restarting on boot # unless it was manually stopped restart: unless-stopped lsmb: depends_on: - postgres image: ghcr.io/ledgersmb/ledgersmb:1.12.2 # In order to store the configuration outside the image, allowing it to # be edited between container restarts, uncomment the section below and # change the 'source' to the directory where you want the configuration # to be stored. # volumes: # # Override all configuration: # - type: bind # source: /home/ledgersmb/conf # target: /srv/ledgersmb/local/conf # # Add a snippet of configuration: # - type: bind # source: /home/ledgersmb/conf/ledgersmb.100.yaml # target: /srv/ledgersmb/local/conf/ledgersmb.100.yaml networks: - internal - default # Comment the 'ports' section to disable mapping the LedgerSMB container port (5762) # to the host's port of the same number. Mapping "5762:5762" makes LedgerSMB # available on http://<host-dns-or-ip>:5762/ # SECURITY NOTE: Leave this uncommented for evaluation purposes only! # In production, be sure to use SSL/TLS (such as by reverse proxying) to protect # user's passwords and other sensitive data ports: - "5762:5762" environment: # The LSMB_WORKERS environment variable lets you select the number # of processes serving HTTP requests. The default number of 2 workers # is geared toward limited-memory situations (1 GB). In order to # improve the performance experience, increase memory and the # number of workers # LSMB_WORKERS: ${LSMB_WORKERS:-5} # # # LSMB_MAIL_SMTPHOST: # LSMB_MAIL_SMTPPORT: # LSMB_MAIL_SMTPTLS: # LSMB_MAIL_SMTPSENDER_HOSTNAME: # LSMB_MAIL_SMTPUSER: # LSMB_MAIL_SMTPPASS: # LSMB_MAIL_SMTPAUTHMECH: # # # The PROXY_IP environment variable lets you set the IP address # (range) of the reverse proxy used for TLS termination, which forwards # its requests to this container. When this reverse proxy runs on the # Docker host, the default below applies. In case the reverse proxy is # hosted in a separate container, this setting needs to be adjusted. # # PROXY_IP: 172.17.0.1/12 # Comment the line below to stop the container from restarting on boot # unless it was manually stopped restart: unless-stopped # having the dbdata volume is required to persist our # data between PostgreSQL container updates; without # that, the data is contained in the same volume as # the rest of the image and on update/upgrade, the # data will be lost. volumes: pgdata: networks: internal: -------------------- >8 ------------------------ Cheers, István 2025. 03. 25, kedd keltezéssel 18.42-kor Harald Bader ezt írta:
For some functionalities i ll get: Invalid server response: document lacks BODY tag (as an example taxes in settings) What is wrong what can i do??
Thx Harald _______________________________________________ devel mailing list -- devel@lists.ledgersmb.org To unsubscribe send an email to devel-leave@lists.ledgersmb.org